Donaldson Compressed Air & Process offers a selection of filter housings used to purify air and technical gases. We offer both non-sanitary and sanitary 3-A housings, both T-type and in-line housings as well as high pressure housings.
Donaldson Compressed Air & Process Filtration offers air, technical gas, and tank ventilation filtration housings to meet your specific requirements.
Donaldson filter housings are 3-A certified
P-EG Gas/Steam Filter Housings
For non-sanitary industrial grade filtration of process air, gases or steam, the P-EG housing is available in 304 or 316L stainless steel with standard flow rates from 30 to 13,000 scfm (20 to 5,400 lbs./hr. steam), and with NPT or flanged connections.
PG-EG Sanitary Air/Gas/Steam Filter Housing
For sanitary filtration of air, gases or steam, the PG-EG housing is available in 316L stainless steel with standard flow rates from 30 to 13,000 scfm (20 to 5,400 lbs./hr. steam), and with Tri-clamp or flanged connections to maintain sterility. All PG-EG filter housings are 3-A certified for use in dairy applications.
PG-IL Sanitary In-line Filter Housings
The PG-IL in-line sanitary air/gas filter housing is an ideal choice for installations with limited space, and when very low pressure drop is required. PG-IL housings are available in both 304 and 316L stainless steel with standard flow rates 215 to 1,290 scfm. All are equipped with Tri-clamp connections.
P-BE Tank Vent Filter Housings
For stationary or mobile tanks that require sanitary filtration of ambient air entering the void space, and no restriction of air aspiration in either flow direction, the P-BE sanitary tank vent filter will meet the requirement. The P-BE filter housing is available in 304 or 316L stainless steel, and is equipped with either Tri-clamp or flanged connections depending on size.
R-EG/R-TF High Purity Filter Housings/Depth Filters
The Ultrapure R-EG filter housings have been designed specifically for low flow applications of high purity gases such as those required by the semiconductor industry. When used in conjunction with our R-TF filter element, an absolute particle retention rate of 0.01 micron can be achieved.
HD High Pressure Filter Housings
Donaldson HD High Pressure filter housings are designed for the purification of compressed air and gases in an industrial operation. The housings made out of two parts offer, due to an optimized construction, low differential pressure at high flow rates. A multitude of housings with different connections allows you to match your specific needs to any application. The HD has 8 different housing sizes available ranging from ¼” to 2” and pressure rating from 400 psig to 5,800 psig.